U-Pol Black Raptor Liner, Black, 1 Quart Kit

The U-Pol Black Raptor Liner kit includes the following:

• 750ml of Black Raptor Liner
• 250ml of Raptor Hardener
• Instructions

Raptor Liner is a tough polyurethane protective coating that can be used to coat various surfaces with a protective barrier. Raptor Liner is easy to use, simply add the hardener to Raptor Liner container, shake well, then it's ready to roll, brush, or spray. Raptor Liner offers superb protection against rust, abrasion, and corrosion giving you a rugged finish that will hold up well to the elements. When dealing with bare metal it is highly recommended that you apply U-Pol Acid #8 Etch Primer prior to applying Raptor Liner. This will give you maximum corrosion protection and adhesion.

Raptor Liner Techinical Data:

Coverage: Approximately 45 Square Feet

Dry to Touch Time: About 1 hour @ 70° F

Between Coat Time: 1 hour @ 70° F

Drive Away Time: 4-6 hours (Raptor Liner must kept dry for 72 hours) .

Full Cure: 5-7 days @ 70° F (No heavy loads on the surface for 7 days.)